Last reviewed: 17 September 2026 · Report a correction
What this symptom means
Banging, clicking, scraping, or a new vibration can have different causes. Load distribution and installation are safe observations; persistent mechanical noise needs assessment.
Possible cause groups
- An uneven or unsuitable load
- A machine that is not stable or level
- A trapped object, wear, or another mechanical fault
What you can check first
- Stop the program if the machine moves violently or the noise is severe.
- After the drum stops, note the load type and whether items are bunched together.
- Observe whether the noise occurs during filling, drum rotation, draining, or high-speed spin.
When to stop
- There is grinding, scraping, violent movement, or visible damage.
- There is smoke, burning smell, sparking, leaking, or unusual heat.
- The same noise returns with a suitable, balanced load.
Prepare the next conversation
Record only what you can obtain safely:
- Full model number
- Short recording if safe
- Program stage
- Load type and machine movement
Next step
Prepare a repair brief
Screen hazards and organize the facts for support or a repairer.
Start the brief →After diagnosisRepair or replace?
Compare a complete quote with a comparable replacement.
Compare options →Operating costEstimate running cost
Use your consumption and local tariffs.
Calculate cost →Source and scope
This manufacturer guidance supports the general symptom and safe first observations. Always use the manual for your exact model.